Archives de catégorie : Non classé

Universal Radio Controller

Cette petite boite (Universal Radio Controller) permet d’ajouter à un poste radio ou un Talkie une carte son et le CAT control afin d’utiliser les modes numériques mais également de l’AX25 et le VARA.

https://g1lro.uk

Universal Radio Controller

Applications:

  • DireWolf
  • Winlink
  • VARA HF et FM
  • KISS modem
  • APRS client
  • APRS digipeater

The version (V2) of this multi-port ‘universal’ radio controller is a simple device that sits between your computer and transceiver and provides the following functions:

1) USB-C sound card to convert the receive/transmit audio from the transceiver to USB, capable up to 48,000 samples per second.

2) Full PTT control to allow automatic receive & transmit using either serial port settings (DTR & CTS) or the CM108 standard supported by popular software (including DireWolf). PTT switching is by a hardware relay for maximum versatility and reliability.

3) CAT (Computer Aided Transceiver) control for connecting to transceivers to allow real-time management of band, frequency and PTT etc. CAT can be two way-so changes on the Radio are shown on the PC software and vice-versa. CAT uses the controller serial port so no special drivers are required.

4) Dedicated connections tor connecting HT (Handie Talkies) that will also provide serial port programming of the HT with CHIRP or the manufacturers software. Makes such as Baofeng and Quansheng will work with this.

DATV Evolution du Firmware du PLUTODVB2

Evolution du Firmware du pluto DATV PLUTODVB2

Rappel: le firmware de F5OEO utilise le DVB FPGA afin de générer le QPSK.

schema DATV PLUTODVB2

le firmware a considérablement évolué:

  • plus d’interface web pour le parametrage
  • Gestion des commande en MQTT
  • longmynd integré dans le firmware du pluto
  • nouveau mode GSE
  • il est possible de recevoir le mode GSE via un Minitiuner mais cela nécessite un soft spcecifique (incompatible avec Minitioune de F6DZP)

Pour plus de details: QuickStartTélécharger

le mode GSE:

Premier QSO DATV du club sur QO100

configuration full duplex, F4IYT en sr125 et F4IYV en sr333

Installation de Xavier en cours…

Félicitation à Xavier pour le long travail de mise au point!

TTGO LORA APRS

L’avantage de ce projet est d’utiliser les capacités TX et RX des cartes TTGO afin de pouvoir publier des messages et info WX, grace à LORA.

Extrait des infos du GIT:

  • Saving, Reading and Deleting Messages.
  • Asking Weather Report
  • Listening to other Trackers arround.
  • Changing Display Eco Mode (turn off after 4 seg).
  • Processor from 240Mhz to 80MHz to save almost 20% power consumption (from ~ 100mA to almost ~80mA)
  • All GPS beacons/packet are encoded for less time on RF/LoRa Tx.
  • 4th line of the OLED SCREEN shows Altitude+Speed+Course or Number of New Messages Received.
  • 5th line of the OLED SCREEN shows Recent Heard Trackers/Station/iGates Tx

De plus il est possible de connecter le TRACKER avec un smarphone android via Aprsdroid en BT et d’utiliser le KISS TNC embarqué dans le TTGO

LORA

Niveau Hardware:

IGATE
Tracker
1/4d’onde 434 Mhz

En cours de test: petit PA bi directionnel RX TX env 1w avec la carte TTGO

Source du projet : https://github.com/richonguzman/LoRa_APRS_Tracker

OpenTuner solution DATV

OpenTuner : Voici une solution intéressante pour utiliser n’importe quel module Minitiouner pour la réception DATV. (fonctionne parfaitement avec celui du REF).https://www.zr6tg.co.za/open-tuner/ : Activités radio

The BATC Minitiouner is arguably the go to hardware for any DATV related experiments both for QO-100 and terrestrially.

There has been loads of projects (MinitiouneWinterhillLongmynd etc) that use the underlying tuner technology. After one of our weekly Sunday DATV nets on QO-100, I got inspired to dig a bit deeper into how the NIM module specifically works and to do some experiments I started to port various bits of the Longmynd project that was developed by Heather Lomond.

It was a slightly deeper rabbit hole than I planned and I ended up port a big chunk of the code to C#. C# is my go to language for doing quick tests that involves a bit more than a regular python script and while I wasn’t planning it, it managed to evolve into a project that I call the Open Tuner.

Basically an opensource windows client that can communicate directly with the Minitiouner over USB. The look is very similar to the Longmynd Client, but its a completely new and different project, although I might integrate the Longmynd client functionality in here as well in the future.

OpenTuner

Réalisation antenne dipôle filaire 40-80m à trappe

Réalisation antenne dipôle filaire 40-80m à trappe

Une trappe est un circuit bouchon qui se comporte comme un isolateur sur sa fréquence de résonance.

Schéma:

l40–>9.95m l80–>6.1m l’utilisation Balun transformateur de courant de rapport 1:1 pour 100w.

Ci-dessous un petit outil simple pour définir la construction.

Mesure de la fréquence de résonance au VNA et réalisation des « outils de mesure »

HAMNET : Equipement de Pascal

Equipement HAMNET en version prototype de Pascal F6HZV

Cœur du système: Entrée 12 V avec interrupteur et fusible.
Convertisseur 12V vers 5V pour alimenter le raspberry.
Le Raspberry PI2 dans son boitier plastique.
Le routeur WIFI donnant l’accès au système global

Photo de la station HAMNET de pascale


Photo de l’ensemble (le mat de l’antenne n’est pas déployé ici pour la photo.

PS: le routeur wifi ne semble avoir aucune influence radio notable sur
la liaison HAMNET.

DATV Essais en cours 437MHZ et 2.4GHZ

Essais en cours DATV 437MHZ et 2.4GHZ

Station DATV remote F4IYV NB et WB QO100. Dernière modification ajout d’un GPSDO pour le pluto. Gil F5CAU prépare le même type de montage.

Notion de Remote : la station (le TRX, ampli et partie RF) sont positionnés au plus près de l’antenne parabole, tout est contrôlé via un câble RJ45 et une alimentation 24-12-5V pour alimenter les différents modules.

Boitier DATV

QSO duplex DATV sur QO100 11/11/2022